**Content:** na_zakaz.zip (1.45 KB)

**Uploaded:** 14.04.2016

**Positive responses:** 0

**Negative responses:** 0

**Sold:** 0

**Refunds:** 0

**Seller:** TerMaster

information about the seller and its items

Loyalty discount! If the total amount of your purchases from the seller more than:

$1 | the discount is | 1% |

$3 | the discount is | 2% |

$5 | the discount is | 3% |

$15 | the discount is | 5% |

$30 | the discount is | 7% |

$50 | the discount is | 10% |

$250 | the discount is | 15% |

$1.96

Solution of the D7 version 35 of Reshebnik on theoretical mechanics Targ SM 1983 - termehu.

Condition Problem D7 (p. 53-55 in the training manual Targ SM 1983.):

The mechanical system consists of the pulleys 1 and 2, wrapped yarns 3-5 and loads attached to these strands (Fig D7.0 -. D7.9, Table D7.). The system moves in a vertical plane under the action of gravity forces and forces of two pairs M1 torque applied to the pulley 1 and the pair M2 torque applied to the pulley 2. The radii of the pulley 1 are stages: R1 = 0,3 m, r1 - 0 15 m, and the pulley 2 - R2 = 0,2 m, r2 = 0,1 m; their inertia with respect to the rotation axis are, respectively, the radii ρ1 = 0,2 m and ρ2 = 0,1 m.

Neglecting friction, determine the acceleration of the load, having a greater weight; weights P1, ..., P6 pulleys and loads given in the table in Newtons and moments - a nyutonmetrah. One of 3,4,5 cargo whose weight is equal to zero, the figure does not portray; pulleys 1, 2 are always part of the system.

Condition Problem D7 (p. 53-55 in the training manual Targ SM 1983.):

The mechanical system consists of the pulleys 1 and 2, wrapped yarns 3-5 and loads attached to these strands (Fig D7.0 -. D7.9, Table D7.). The system moves in a vertical plane under the action of gravity forces and forces of two pairs M1 torque applied to the pulley 1 and the pair M2 torque applied to the pulley 2. The radii of the pulley 1 are stages: R1 = 0,3 m, r1 - 0 15 m, and the pulley 2 - R2 = 0,2 m, r2 = 0,1 m; their inertia with respect to the rotation axis are, respectively, the radii ρ1 = 0,2 m and ρ2 = 0,1 m.

Neglecting friction, determine the acceleration of the load, having a greater weight; weights P1, ..., P6 pulleys and loads given in the table in Newtons and moments - a nyutonmetrah. One of 3,4,5 cargo whose weight is equal to zero, the figure does not portray; pulleys 1, 2 are always part of the system.

After payment you will receive a unique reference to a quality solution of D7 Option 35 on the theoretical mechanics of a single SM Reshebnik Targ 1983.

The decision is made on the job methodical instructions and control tasks termehu for part-time students of thermal power, mining, metallurgy, electro-instrument-making, automation and technological specialties universities.

The decision is decorated in a word / pdf format / less hand-written in jpg or gif format verify if necessary.

I would be very grateful, if after downloading works you leave a positive review. This will help to make the service better.

Thank you in advance.

The decision is made on the job methodical instructions and control tasks termehu for part-time students of thermal power, mining, metallurgy, electro-instrument-making, automation and technological specialties universities.

The decision is decorated in a word / pdf format / less hand-written in jpg or gif format verify if necessary.

I would be very grateful, if after downloading works you leave a positive review. This will help to make the service better.

Thank you in advance.

No feedback yet